to install a traktor mapping file, first download the file (right click -> save link as.. ). then in traktor, go to preferences and under controller manager, in the device setup section, click add... and then import. select the new file and click open. then under device select your new mapping and make sure that digital warrior is set under in and out ports.

sequencer mapping for traktor remix decks

besides the built in sequencer controls, the mapping also gives control over the remix deck filter, volume and effects control on page 5. 

to enable the filter and volume control press down and hold a top row button (1) corresponding to the desired sample slot and twist the encoders, a - volume b - filter. there is also the ability to mute individual sample slots with buttons in the second top row (2).

the buttons in the third row give control over the effects unit (please activate 4 effect units in traktor's settings). buttons (4-5) enable/disable the individual effects and button (3) instantly disables all effects. the bottom row buttons (6) give you the ability to choose which sample sots to route through the effects unit and which to leave dry.

the knobs control the dry/wet parameter of the effects unit.


version 0.2 download (34.3 kb)

for firmware 1.8 and above. added velocity feature as remix deck track volume.

version 0.3 download (34.4 kb)

basic sequencer mapping for traktor remix decks

download (604kb)

copy the downloaded folder to your ableton live's midi remote scripts folder. located in C:\ProgramData\Ableton\Live 9 Suite\Resources\MIDI Remote Scripts under windows or\Live x.x\\Contents\App-Resources\MIDI Remote Scripts\ for mac osx.

launch ableton live and go to preferences. under midi sync tab select the script in the control surface drop down list and set the correct input and output MIDI ports.

the clip launcher script creates a 4x4 red box in ableton, auto mapping the first page buttons to the 16 clips inside the red box, from there you can launch and stop them just like with a launchpad. the second page gives you access to track controls like, mute, solo, arm record and track select. and on the third page you have the move buttons for the red box grid

(1) currently playing clip, (2) stopped clips, (3) triggered to play clip, (4) recording clip

(1) track mute, (2) track solo or cue, (3) arm record, (4) selected track

(1) move left, (2) move down, (3) move right, (4) move up

the script currently runs on midi channel 9. to change the channel simply open and edit the file

download (4 kb)


update for firmware 1.8

implemented scrolling with the encoders on page 1. enable ableton encoders mode first.

download (8 kb)

wood and steel enclosure
elegant minimal design